Measurement Data and Information of Non-Automatic Weighing Instruments as Structured Data |
|---|
| Tatyana Sheveleva, Gisa Foyer |
- Abstract:
- The successful digitization of documents in conformity assessment, e.g. for calibration and test, requires both the compliance with different requirements and the use of a unified machine-readable data structure. A well-known example is the data structure for the Digital Calibration Certificate (DCC). Its use is proposed by the German Calibration Service (DKD) in its Report DKD-E 7-3 for the digitization of calibration certificates for non-automatic weighing instruments (NAWIs). An analysis has been carried out to check whether the proposal can be applied to OIML R 76 test reports. By comparing the measurement data and information in both types of documents, similarities and differences in the content description were identified. The following publication gives an overview of this analysis and its results and provides suggestions for the description of the test reports using the DCC.
- Download:
- IMEKO-TC6-2025-054.pdf
- DOI:
- 10.21014/tc6-2025.054
- Event details
- IMEKO TC:
- TC6
- Event name:
- TC6 M4Dconf2025
- Title:
2025 IMEKO TC-6 International Conference on Metrology and Digital Transformation
- Place:
- Benevento, ITALY
- Time:
- 03 September 2025 - 05 September 2025