INTERNAL COMPARISON BETWEEN A REFERENCE TYPE TORQUE CALIBRATION MACHINE AND A 10 N·m DEADWEIGHT TORQUE STANDARD MACHINE |
|---|
| A. Nishino, M. Hamaji, K. Ogushi |
- Abstract:
- A reference torque calibration machine (RTCM) has been developed to validate the calibration of efficient torque transducers. In this study, the calibration and measurement capability (CMC) of the RTCM was evaluated based on the technical guideline. We also compared the RTCM and a 10 N·m deadweight torque standard machine at the National Metrology Institute of Japan (NMIJ) using a torque measuring device with a nominal capacity of 1 N·m.
- Keywords:
- torque; calibration; reference type torque calibration machine; internal comparison; uncertainty
- Download:
- IMEKO-TC3-2022-010.pdf
- DOI:
- 10.21014/tc3-2022.010
- Event details
- IMEKO TC:
- TC3
- Event name:
- TC3 Conference 2022
- Title:
24th Conference on the Measurement of Force, Mass and Torque (together with the 14th TC5 Conference on the Measurement of Hardness, the 6th TC16 Conference on Pressure and Vacuum Measurement, and the 5th TC22 Conference on Vibration Measurement)
- Place:
- Cavtat-Dubrovnik, CROATIA
- Time:
- 11 October 2022 - 13 October 2022