Automatic Industrial Electrical Circuit Firing Prevention using Infrared Termography |
|---|
| Maurizio Caciotta, Fabio Leccese, Giuseppe Schirripa Spagnolo, Lorenzo Cozzella |
- Abstract:
- An important problem in industrial system, both working in low and medium power, is the possibility that some circuits have a current dispersion, with a subsequent increasing in local temperature. This situation, if not immediately corrected, can produce, in some cases, firing accidents, with a great amount of money loss and long period of out-of-order systems. Although procedures based on Infrared Thermography to analyze and find critical situations already exist, these are always based on long manual procedures and usually are used for analysis of complex industrial systems. In this paper, after a short review of the common manual thermograph investigation, an automatic system based on two infrared thermograph cameras and an image processing real time analysis is proposed. The device demonstrates the possibility to take under control some critical systems and preventing firing accident in automatic way. This solution can be easily integrated in a SCADA architecture for monitoring and alerting the supervisor about over-temperature or current dissipation cases.
- Keywords:
- Infrared thermography, Thermal anomaly, Image processing, electric equipment control, Forensic Metrology
- Download:
- IMEKO-TC4-2014-270.pdf
- DOI:
- -
- Event details
- IMEKO TC:
- TC4
- Event name:
- TC4 Symposium 2014
- Title:
20th IMEKO TC4 Symposium on Measurements of Electrical Quantities (together with 18th TC4 International Workshop on ADC and DCA Modeling and Testing, IWADC)
"Research on Electrical and Electronic Measurement for the Economic Upturn"- Place:
- Benevento, ITALY
- Time:
- 15 September 2014 - 17 September 2014