SELF-CALIBRATION OF A 3DOF PARALLEL MECHANISM |
|---|
| Kazuki Fujiyama, Miyu Ozaki, Ryoshu Furutani |
- Abstract:
- Most of positioning devices are calibrated by comparing with an artifact or other measuring machine. These methods need an artifact or a measuring machine.
On the other hand a Self-calibration is the best method for small or big positioning devices which are hard to make artifacts, because the method does not need an artifact.
In the purpose of this study is to apply the Self-calibration to a parallel mechanism. In this paper, we built a small 3DOF (x and y direction and rotational movement around stylus) parallel mechanism and studied its movement. It was proved the method had the benefit for the mechanism by previous study. - Keywords:
- self-calibration, 3DOF parallel mechanism, elastic hinge, piezo actuator
- Download:
- IMEKO-WC-2012-TC14-O16.pdf
- DOI:
- -
- Event details
- Event name:
- XX IMEKO World Congress
- Title:
Metrology for Green Growth
- Place:
- Busan, REPUBLIC of KOREA
- Time:
- 09 September 2012 - 12 September 2012