POSIBILITIES OF IMPROOVING OF POSITIONAL PRECISION OF MACHINE TOOLS WITH LINEAR AXES |
|---|
| Tomas Loebl, Eva Kureková, Rudolf Palencár |
- Abstract:
- The positional deviation (difference between the actual and target position) belongs to the important criteria that describe the performance of numerically controlled axes. The procedure for determination of such deviation is described in the international standard ISO 230- 2:1997. This standard provides calculation of the positional deviation only in several discrete (measuring) points. Moreover it does not consider effects of the measuring instrument on the obtained results. The new methodology is adopted and it is enables estimation of the positional deviation in any point of the axis travel, together with the uncertainty of such estimate. Obtained results can be incorporated into a control system in the form of corrections enhancing positioning possibilities of individual axes.
The paper introduces procedures that were verified by measurements for one linear axis. The more complicated situation occurs for testing the positioning accuracy in a plane or in a space. Paper also talks about possibilities of using such a measurement in process of controlling for compensation. Such compensation can bring great improvement in positional accuracy of machine tools. - Keywords:
- machine tools, positional deviation, control system
- Download:
- IMEKO-WC-2009-TC14-210.pdf
- DOI:
- -
- Event details
- Event name:
- XIX IMEKO World Congress
- Title:
Fundamental and Applied Metrology
- Place:
- Lisbon, PORTUGAL
- Time:
- 06 September 2009 - 11 September 2009