REALIZATION, MAINTENANCE AND DISSEMINATION OF THE MEASURAND "AC VOLTAGE RATIO IN MV/V" FOR STRAIN GAUGE MEASUREMENTS |
|---|
| Reinhold Vollmert, Günther Ramm |
- Abstract:
- Strain gauges allow the measurands force, pressure, torque or strain to be converted into voltage ratios and to be indicated by measuring amplifiers. Precision measurements are preferably carried out at 225 Hz and at voltage ratios of up to 2 mV/V. Bridge standards, which have to be traced back to national standards, are used for the electrical calibration of these measuring amplifiers. More than 15 years ago, in PTB the first measuring arrangement for this purpose has been developed and installed. The present contribution explains the traceability principle of bridge standards, shows the long-term stability of selected bridge standards on the basis of measurement results and brings first investigations into the interchangeability of measuring amplifiers up for discussion.
- Download:
- IMEKO-TC3-2002-023.pdf
- DOI:
- -
- Event details
- IMEKO TC:
- TC3
- Event name:
- Joint International Conference on Force, Mass, Torque, Hardness and Civil Engineering Metrology in the age of globalization
- Title:
18th Conference on Force, Mass and Torque (together with 8th HARDMEKO TC5 Conference on Hardness Measurement and 1st TC20 Conference on Civil Engineering Metrology)
- Place:
- Celle, GERMANY
- Time:
- 24 September 2002 - 26 September 2002